Rigorous trainer selection
Each trainer is validated on three criteria: hands-on field expertise, proven pedagogy and alignment with your industry.
- Triple validation: technical, pedagogical, sectoral.
- Minimum rating 4.8/5 over the last 12 sessions.
Training Industrial Network - Reflectometry and Cabling
Trusted by — schools, companies and industrial groups
25,747 programs · 25 countries
Every program built with a dedicated engineer
Companies: Aptar, ArcelorMittal, Equans, EDF, Ubisoft and Microsoft.
Learning objectives
- Physically diagnose an industrial network by measuring cable quality, impedance, attenuation, and crosstalk on real installations.
- Locate any fault using reflectometry and accurately interpret the trace obtained on twisted pair cables.
- Verify shielding, grounding continuity, and equipotentiality to ensure electromagnetic compliance.
- Identify electromagnetic disturbances generated by variable frequency drives or welding stations.
- Compile a complete cabling acceptance dossier before any commissioning.
- Use oscilloscopes and frame analyzers to validate each segment of the industrial network.
- Optimize predictive maintenance by detecting physical anomalies before software failures occur.
Program
Module 1Fundamental cabling measurements (oscilloscope, multimeter)
Participants perform complete measurements of impedance, length, attenuation, and crosstalk on defective industrial networks. They operate high-precision oscilloscopes and multimeters, compare results against standards, and immediately identify cabling anomalies. Each pair produces an initial measurement report.
Module 2Reflectometry and fault location (reflectometer)
Intensive training in reflectometry: acquisition and interpretation of traces on industrial pairs. Trainees locate breaks, short circuits, and mismatches on real faulty cables. They compare multiple wavelengths and record exact distances in their deliverables.
Module 3Shielding, grounding, and electromagnetic disturbances (spectrum analyzer)
Verification of shielding, grounding continuity, and equipotentiality on cabinets and cable trays. Learners detect disturbances from drives and welding, use a spectrum analyzer to map parasitic fields, and propose concrete corrections.
Module 4Acceptance dossier and final validation (complete test tools)
Drafting and presentation of the cabling acceptance dossier. Each participant compiles measurements, reflectometry traces, grounding checks, and disturbance reports on a real network. The session concludes with collective validation of dossiers and sharing of predictive maintenance best practices.
Evaluation method
- Real-world scenario on a faulty network
- Production and presentation of the acceptance dossier
- Evaluation grid for measurements and interpretations
Learning method
- Intensive practice on defective industrial networks
- Physical diagnostic methodology before software investigation
- Expert use of reflectometer and oscilloscope
- Drafting professional deliverables aligned with Qualiopi requirements
Methods, materials and delivery
The Training Industrial Network - Reflectometry and Cabling program is delivered onsite or remote (blended-learning, virtual classroom, remote presence). At Learni, an industry-certified training organization, every program is built to maximize skills acquisition regardless of the chosen format.
The trainer alternates between demonstrative, interrogative and active methods (through hands-on labs and/or scenarios). This pedagogical approach guarantees concrete learning that's immediately applicable at work.
Equipment required
For the smooth delivery of the Training Industrial Network - Reflectometry and Cabling program, the following equipment is required:
- Mac or PC computers, high-speed fiber internet, whiteboard or flipchart, projector or interactive touch screen (for remote sessions)
- Training environments installed on workstations or accessible online
- Course materials, hands-on exercises and complementary resources
- Post-training access to materials and educational resources
For intra-company training on a site outside Learni, the client commits to providing all required teaching materials (computers, internet, etc.) for the smooth delivery of the program in line with the prerequisites in the communicated program.
* contact us for remote delivery feasibility** ratio varies depending on the program
Skills assessment methods
Assessment of skills acquired during the Training Industrial Network - Reflectometry and Cabling program is performed through:
- During training: case studies, hands-on labs and professional scenarios
- End of training: self-assessment questionnaire and skills evaluation by the trainer
- After training: completion certificate detailing acquired skills
Program accessibility
Learni is committed to making its programs accessible. All our programs are accessible to people with disabilities. Our teams are available to adapt the pedagogical methods to your specific needs. Please contact us for any adjustment request.
Enrollment terms and lead times
Registration is possible up to 48 business hours before the start of training. All our programs are built for corporate L&D budgets and delivered onsite or remotely.
The Learni story
Founded by engineers and learning experts, Learni's mission is to make high-impact tech training accessible to teams everywhere. We work remotely with organizations across the US and Canada, in your time zone, to help teams upskill fast.
Our method
Training quality, guaranteed at every step
Before, during, after: we frame the brief, introduce the trainer, tailor the content and measure impact. You stay in control from kickoff to wrap-up.
You meet the trainer beforehand
30-minute video call between you and the selected trainer to validate the fit, adjust content and clear any final doubts.
- Live briefing on goals and team context.
- Veto right — we swap the trainer for free if needed.
Content tailored to your context
No recycled slides. The syllabus is reworked from your real cases: tools, constraints, vocabulary, ongoing projects.
- Hands-on cases drawn from your stack and projects.
- Program co-written then validated by your team.
Continuous quality follow-up
Live evaluations, 30/90/180-day check-ins and a consolidation plan. If the impact misses the mark, we rework it.
- NPS, knowledge quizzes and skills self-assessment.
- Satisfaction guarantee: fully satisfied or free rework.
A simple promise: you don't pay to discover the trainer on day one. Everything is validated upfront, by you.
Our social commitment
A school kit donated to a child for every training booked
To fight inequalities in access to education, Learni donates a complete school kit to a child in need for every training booked. You build your skills, a child heads back to school.
- Backpack, notebooks and essential supplies
- Distributed through our partner charities
- Included, at no extra cost to you
FAQ
Frequently asked questions
Which tools are used in Industrial Network training?+
Hands-on work runs on oscilloscope, multimeter, reflectometer, spectrum analyzer and complete test tools. Those tools come from the Industrial Network program itself, delivered in-person over 4 days, so participants practise on the stack they will use at work.
What can participants do after Industrial Network training?+
They can physically diagnose an industrial network by measuring cable quality, impedance, attenuation, and crosstalk on real installations, locate any fault using reflectometry and accurately interpret the trace obtained on twisted pair cables and verify shielding, grounding continuity, and equipotentiality to ensure electromagnetic compliance. Those are the stated objectives of the Industrial Network program at Advanced level, checked by the end-of-session assessment.
What does the Industrial Network program cover, day by day?+
Day 1: Fundamental cabling measurements (oscilloscope, multimeter). Day 2: Reflectometry and fault location (reflectometer). Day 3: Shielding, grounding, and electromagnetic disturbances (spectrum analyzer). Day 4: Acceptance dossier and final validation (complete test tools). The Industrial Network program runs over 4 days, delivered in-person.
How is Industrial Network training assessed?+
Assessment relies on real-world scenario on a faulty network, production and presentation of the acceptance dossier and evaluation grid for measurements and interpretations. Learni issues a completion certificate together with the individual assessment report at the end of the Industrial Network program, which an L&D team can file as evidence.
How much does Industrial Network training cost per participant?+
Industrial Network training is priced on quote. The amount depends on headcount, format and how far the syllabus is tailored to your team. A detailed quote is sent within one business day, and team pricing covers the whole group from the second participant.Industrial Network training costs $4,620 per participant. For an in-company team, the flat rate starts at $7,865 for the whole group, up to 8 people. The detailed quote, sent within one business day, adjusts the amount to the format and how far the syllabus is tailored to your team.
How long does Industrial Network training take?+
4 days, available live online (US time zones) or on-site at your offices. Half-day tracks spread over several weeks are possible so the team stays operational.
Who pays for Industrial Network training?+
Most US teams pay directly through their company L&D or training budget. Learni invoices in US dollars and accepts bank transfer (ACH/wire) or card, with volume pricing for teams. A purchase order is welcome.
What do participants need to know before Industrial Network training?+
Confirmed experience in industrial networks, programmable logic controllers, and electrical fundamentals; regular practice with field measurements.
Is a certificate issued after Industrial Network training?+
Yes. A Learni completion certificate is issued, along with the individual evaluation report. Learni is a certified training provider and prepares for third-party certifications, but does not award them itself.
Your professional training, anywhere
Let's build
your next
program.
30 minutes with a learning advisor. No commitment. No sales pitch dressed up as a demo.
Reply within 24h · Vetted experts · USD invoicing · W-9 available
Suggestions
You might
like these too.
Robotics & Industry 4.0Industry-certifiedTraining Sensor fusion in the enterprise
On quote$4,620Quote within 24h
Robotics & Industry 4.0Industry-certifiedTraining ONNX Robot Deployment in Enterprise
On quote$4,620Quote within 24h
Robotics & Industry 4.0Industry-certifiedTraining Practical Workshop: Visual SLAM (ORB-SLAM)
On quote$5,775Quote within 24h
Robotics & Industry 4.0
More programs in Robotics & Industry 4.0.
Robotics & Industry 4.0Industry-certifiedTraining Airborne Ultrasound - Detecting Leaks and Discharges
On quote$3,465Quote within 24h
Robotics & Industry 4.0Industry-certifiedTraining Covariances Uncertainty - Reliable Sensor Fusion
On quote$3,465Quote within 24h
Robotics & Industry 4.0Industry-certifiedTraining Envelope Spectrum Bearing - Diagnosing Machine Defects
On quote$4,620Quote within 24h
On-site & remote
This training across cities
Available on-site and remotely. Pick your city to see the local training center.