← Back Explore the IoT & embedded systems category

Training Temperature Measurement - Industrial Sensor Reliability

Course created on October 8, 2026Updated on October 9, 2026

On quote$3,465

3 days
Remote
10 people max.

Request a quote See the program

Ref: FWN327

10 people max.

On quote$3,465

In-company rate: on quotefrom $6,290 for the whole team

On-site and certification exam on quote

3 days

Remote

Don't let this gap widen

Why this program matters

Without this upskilling, your team accumulates a technological gap that translates directly into productivity loss.
Organizations that don't train their talents on key topics see their competitiveness drop.
Every quarter without training is a gap widening with competitors who invest.
The cost of inaction quickly exceeds that of well-targeted training.

Trusted by — schools, companies and industrial groups

25,718 programs · 25 countries

Every program built with a dedicated engineer

Companies: Aptar, ArcelorMittal, Equans, EDF, Ubisoft and Microsoft.

Learning objectives

Master industrial temperature measurement with thermocouples, Pt100 probes, and thermistors in operational professional training
Select the appropriate sensor based on range, accuracy, and environment
Wire in two, three, or four wires and quantify errors
Compensate for cold junction and estimate complete response time
Connect the loop, verify uncertainty, and compare to a standard
Develop diagnostic and adjustment procedures for the company

Program

Module 1Sensor selection and wiring (thermocouples, Pt100)

Analysis of ranges and accuracies to select thermocouples, Pt100 probes, or thermistors. Two-, three-, and four-wire wiring exercises with error calculation. Cold junction compensation and identification of common pitfalls. Real-loop case studies and annotated schematic deliverables.

Module 2Response time and integration (Arduino, Raspberry Pi)

Estimation of overall probe and thermowell response time. Mounting on embedded systems for acquisition and recording. Signal comparison and parameter tuning. Practical exercises with real sensors and analysis of observed deviations in control loops.

Module 3Verification and diagnostics (MQTT, sensors)

Complete measurement loop connection and accuracy verification against standards. Loop diagnostics with associated uncertainty. Creation of adjustment and control procedures for company use. Experience feedback and validation of acquired skills on industrial cases.

Evaluation method

Hands-on wiring and measurement on real loops
Error analysis and corrective recommendations
Drafting of a verification procedure

Learning method

Practical workshops on industrial sensors
Guided exercises with standards and data loggers
Industry-based case studies
Distribution of technical sheets and procedures

Methods, materials and delivery

The Training Temperature Measurement - Industrial Sensor Reliability program is delivered onsite or remote (blended-learning, virtual classroom, remote presence). At Learni, an industry-certified training organization, every program is built to maximize skills acquisition regardless of the chosen format.

The trainer alternates between demonstrative, interrogative and active methods (through hands-on labs and/or scenarios). This pedagogical approach guarantees concrete learning that's immediately applicable at work.

Equipment required

For the smooth delivery of the Training Temperature Measurement - Industrial Sensor Reliability program, the following equipment is required:

Mac or PC computers, high-speed fiber internet, whiteboard or flipchart, projector or interactive touch screen (for remote sessions)
Training environments installed on workstations or accessible online
Course materials, hands-on exercises and complementary resources
Post-training access to materials and educational resources

For intra-company training on a site outside Learni, the client commits to providing all required teaching materials (computers, internet, etc.) for the smooth delivery of the program in line with the prerequisites in the communicated program.

* contact us for remote delivery feasibility** ratio varies depending on the program

Skills assessment methods

Assessment of skills acquired during the Training Temperature Measurement - Industrial Sensor Reliability program is performed through:

During training: case studies, hands-on labs and professional scenarios
End of training: self-assessment questionnaire and skills evaluation by the trainer
After training: completion certificate detailing acquired skills

Program accessibility

Learni is committed to making its programs accessible. All our programs are accessible to people with disabilities. Our teams are available to adapt the pedagogical methods to your specific needs. Please contact us for any adjustment request.

Enrollment terms and lead times

Registration is possible up to 48 business hours before the start of training. All our programs are built for corporate L&D budgets and delivered onsite or remotely.

The Learni story

Founded by engineers and learning experts, Learni's mission is to make high-impact tech training accessible to teams everywhere. We work remotely with organizations across the US and Canada, in your time zone, to help teams upskill fast.

Our method

Training quality, guaranteed at every step

Before, during, after: we frame the brief, introduce the trainer, tailor the content and measure impact. You stay in control from kickoff to wrap-up.

Step 1

Rigorous trainer selection

Each trainer is validated on three criteria: hands-on field expertise, proven pedagogy and alignment with your industry.

Triple validation: technical, pedagogical, sectoral.
Minimum rating 4.8/5 over the last 12 sessions.

Step 2

You meet the trainer beforehand

30-minute video call between you and the selected trainer to validate the fit, adjust content and clear any final doubts.

Live briefing on goals and team context.
Veto right — we swap the trainer for free if needed.

Step 3

Content tailored to your context

No recycled slides. The syllabus is reworked from your real cases: tools, constraints, vocabulary, ongoing projects.

Hands-on cases drawn from your stack and projects.
Program co-written then validated by your team.

Step 4

Continuous quality follow-up

Live evaluations, 30/90/180-day check-ins and a consolidation plan. If the impact misses the mark, we rework it.

NPS, knowledge quizzes and skills self-assessment.
Satisfaction guarantee: fully satisfied or free rework.

A simple promise: you don't pay to discover the trainer on day one. Everything is validated upfront, by you.

A child walking to school with a backpack

Our social commitment

A school kit donated to a child for every training booked

To fight inequalities in access to education, Learni donates a complete school kit to a child in need for every training booked. You build your skills, a child heads back to school.

Backpack, notebooks and essential supplies
Distributed through our partner charities
Included, at no extra cost to you

Enroll and offer a kit

FAQ

Frequently asked questions

Which tools are used in Temperature Measurement training?+

Hands-on work runs on thermocouples, pt100, arduino, raspberry Pi, MQTT and sensors. Those tools come from the Temperature Measurement program itself, delivered remotely over 3 days, so participants practise on the stack they will use at work.

What can participants do after Temperature Measurement training?+

They can master industrial temperature measurement with thermocouples, Pt100 probes, and thermistors in operational professional training, select the appropriate sensor based on range, accuracy, and environment and wire in two, three, or four wires and quantify errors. Those are the stated objectives of the Temperature Measurement program at Intermediate level, checked by the end-of-session assessment.

What does the Temperature Measurement program cover, day by day?+

Day 1: Sensor selection and wiring (thermocouples, Pt100). Day 2: Response time and integration (Arduino, Raspberry Pi). Day 3: Verification and diagnostics (MQTT, sensors). The Temperature Measurement program runs over 3 days, delivered remotely.

How is Temperature Measurement training assessed?+

Assessment relies on hands-on wiring and measurement on real loops, error analysis and corrective recommendations and drafting of a verification procedure. Learni issues a completion certificate together with the individual assessment report at the end of the Temperature Measurement program, which an L&D team can file as evidence.

How much does Temperature Measurement training cost per participant?+

Temperature Measurement training is priced on quote. The amount depends on headcount, format and how far the syllabus is tailored to your team. A detailed quote is sent within one business day, and team pricing covers the whole group from the second participant.

How long does Temperature Measurement training take?+

3 days, available live online (US time zones) or on-site at your offices. Half-day tracks spread over several weeks are possible so the team stays operational.

Who pays for Temperature Measurement training?+

Most US teams pay directly through their company L&D or training budget. Learni invoices in US dollars and accepts bank transfer (ACH/wire) or card, with volume pricing for teams. A purchase order is welcome.

What do participants need to know before Temperature Measurement training?+

Basic knowledge of electricity, schematic reading, and analog measurement.

Is a certificate issued after Temperature Measurement training?+

Yes. A Learni completion certificate is issued, along with the individual evaluation report. Learni is a certified training provider and prepares for third-party certifications, but does not award them itself.

Your professional training, anywhere