← Back Explore the IoT & embedded systems category

Training Arduino - Master the Basics for Your IoT Projects

Course created on July 27, 2026Updated on October 5, 2026

On quote$5,775

5 days
Onsite
10 people max.

Request a quote See the program

Ref: LIX892

10 people max.

On quote$5,775

In-company rate: on quotefrom $10,395 for the whole team

On-site and certification exam on quote

5 days

Onsite

Don't let this gap widen

Why this program matters

Without solid fundamentals, 70% of beginners abandon their Arduino projects after weeks of frustration: circuits that burn out, endless error-filled code, inert prototypes despite hours wasted.
Save 50h of pointless trial and error, avoid the 200€ in components wasted on failed tests.
With this training, go from zero to expert in 5 days, turn wild ideas into working robots, and launch into IoT without risk.
Don't let the competition get ahead of you in the maker market.

Trusted by — schools, companies and industrial groups

25,718 programs · 25 countries

Every program built with a dedicated engineer

Companies: Aptar, ArcelorMittal, Equans, EDF, Ubisoft and Microsoft.

Learning objectives

Discover the Arduino ecosystem and its essential components
Install and configure the Arduino IDE for programming
Write basic sketches to control LEDs and buzzers
Connect sensors and actuators safely
Build a complete and functional interactive project
Debug code and optimize simple prototypes

Program

Module 1Arduino Introduction: Uno Board, IDE, First Blink (IDE Tools, Wiring, Sketches)

Dive into the Arduino universe by installing the IDE on your PC, test your Uno board with a USB cable, program your first sketch to blink an LED, explore the breadboard for solderless connections, complete guided exercises on electrical basics, and finish with a deliverable: a personalized blinking circuit that gives you immediate confidence.

Module 2Basic Programming: Variables, Loops, Conditions (C++ Methods, Serial Monitor)

Master the Arduino language by writing sketches with variables and loops, use the serial monitor to debug in real-time, code light sequences with multiple LEDs, practice interactive exercises on if-else statements, apply to concrete cases like a traffic light, and produce a deliverable: dynamic program ready to flash.

Module 3Analog Sensors: Photoresistor, Potentiometer (ADC Tools, Calibration)

Connect and calibrate analog sensors on pins A0-A5, read values in real-time via ADC, code automatic reactions like varying LED intensity based on ambient light, test with a potentiometer to simulate, chain practical exercises and real automation cases, deliverable: environment-reactive prototype that amazes.

Module 4Actuators and Servos: Motors, Buzzers (PWM Methods, Servo Libraries)

Control buzzers for sound alerts and servo motors for precise movements, generate PWM to vary speeds and tones, integrate ready-to-use libraries, complete exercises on a simple articulated arm, apply to projects like an alarm signal, and create a deliverable: interactive motorized device that is ultra-motivating.

Module 5Final IoT Project: Synthesis of Sensors/Actuators (Debugging, Optimization, Deployment)

Assemble everything into a complete project like a temperature sensor with buzzer alert, integrate Serial for remote monitoring, optimize code against common bugs, test in real conditions via videoconference, receive personalized feedback, and leave with a deliverable: functional IoT prototype, technical dossier, and certificate to boost your CV.

Evaluation method

Daily interactive quizzes, graded final project, practical self-assessment, Qualiopi certificate.

Learning method

100% hands-on with provided kit, real exercises, individualized video feedback, unlimited replay platform.

Methods, materials and delivery

The Training Arduino - Master the Basics for Your IoT Projects program is delivered onsite or remote (blended-learning, virtual classroom, remote presence). At Learni, an industry-certified training organization, every program is built to maximize skills acquisition regardless of the chosen format.

The trainer alternates between demonstrative, interrogative and active methods (through hands-on labs and/or scenarios). This pedagogical approach guarantees concrete learning that's immediately applicable at work.

Equipment required

For the smooth delivery of the Training Arduino - Master the Basics for Your IoT Projects program, the following equipment is required:

Mac or PC computers, high-speed fiber internet, whiteboard or flipchart, projector or interactive touch screen (for remote sessions)
Training environments installed on workstations or accessible online
Course materials, hands-on exercises and complementary resources
Post-training access to materials and educational resources

For intra-company training on a site outside Learni, the client commits to providing all required teaching materials (computers, internet, etc.) for the smooth delivery of the program in line with the prerequisites in the communicated program.

* contact us for remote delivery feasibility** ratio varies depending on the program

Skills assessment methods

Assessment of skills acquired during the Training Arduino - Master the Basics for Your IoT Projects program is performed through:

During training: case studies, hands-on labs and professional scenarios
End of training: self-assessment questionnaire and skills evaluation by the trainer
After training: completion certificate detailing acquired skills

Program accessibility

Learni is committed to making its programs accessible. All our programs are accessible to people with disabilities. Our teams are available to adapt the pedagogical methods to your specific needs. Please contact us for any adjustment request.

Enrollment terms and lead times

Registration is possible up to 48 business hours before the start of training. All our programs are built for corporate L&D budgets and delivered onsite or remotely.

The Learni story

Founded by engineers and learning experts, Learni's mission is to make high-impact tech training accessible to teams everywhere. We work remotely with organizations across the US and Canada, in your time zone, to help teams upskill fast.

Our method

Training quality, guaranteed at every step

Before, during, after: we frame the brief, introduce the trainer, tailor the content and measure impact. You stay in control from kickoff to wrap-up.

Step 1

Rigorous trainer selection

Each trainer is validated on three criteria: hands-on field expertise, proven pedagogy and alignment with your industry.

Triple validation: technical, pedagogical, sectoral.
Minimum rating 4.8/5 over the last 12 sessions.

Step 2

You meet the trainer beforehand

30-minute video call between you and the selected trainer to validate the fit, adjust content and clear any final doubts.

Live briefing on goals and team context.
Veto right — we swap the trainer for free if needed.

Step 3

Content tailored to your context

No recycled slides. The syllabus is reworked from your real cases: tools, constraints, vocabulary, ongoing projects.

Hands-on cases drawn from your stack and projects.
Program co-written then validated by your team.

Step 4

Continuous quality follow-up

Live evaluations, 30/90/180-day check-ins and a consolidation plan. If the impact misses the mark, we rework it.

NPS, knowledge quizzes and skills self-assessment.
Satisfaction guarantee: fully satisfied or free rework.

A simple promise: you don't pay to discover the trainer on day one. Everything is validated upfront, by you.

A child walking to school with a backpack

Our social commitment

A school kit donated to a child for every training booked

To fight inequalities in access to education, Learni donates a complete school kit to a child in need for every training booked. You build your skills, a child heads back to school.

Backpack, notebooks and essential supplies
Distributed through our partner charities
Included, at no extra cost to you

Enroll and offer a kit

FAQ

Frequently asked questions

Which tools are used in Arduino training?+

Hands-on work runs on IDE Tools, wiring, sketches, c++ Methods, serial Monitor and ADC Tools. Those tools come from the Arduino program itself, delivered on site over 5 days, so participants practise on the stack they will use at work.

What can participants do after Arduino training?+

They can discover the Arduino ecosystem and its essential components, install and configure the Arduino IDE for programming and write basic sketches to control LEDs and buzzers. Those are the stated objectives of the Arduino program at Beginner level, checked by the end-of-session assessment.

What does the Arduino program cover, day by day?+

Day 1: Arduino Introduction: Uno Board, IDE, First Blink (IDE Tools, Wiring, Sketches). Day 2: Basic Programming: Variables, Loops, Conditions (C++ Methods, Serial Monitor). Day 3: Analog Sensors: Photoresistor, Potentiometer (ADC Tools, Calibration). Day 4: Actuators and Servos: Motors, Buzzers (PWM Methods, Servo Libraries). Day 5: Final IoT Project: Synthesis of Sensors/Actuators (Debugging, Optimization, Deployment). The Arduino program runs over 5 days, delivered on site.

How is Arduino training assessed?+

Assessment relies on daily interactive quizzes, graded final project, practical self-assessment, Qualiopi certificate. Learni issues a completion certificate together with the individual assessment report at the end of the Arduino program, which an L&D team can file as evidence.

How much does Arduino training cost per participant?+

Arduino training is priced on quote. The amount depends on headcount, format and how far the syllabus is tailored to your team. A detailed quote is sent within one business day, and team pricing covers the whole group from the second participant.

How long does Arduino training take?+

5 days, available live online (US time zones) or on-site at your offices. Half-day tracks spread over several weeks are possible so the team stays operational.

Who pays for Arduino training?+

Most US teams pay directly through their company L&D or training budget. Learni invoices in US dollars and accepts bank transfer (ACH/wire) or card, with volume pricing for teams. A purchase order is welcome.

What do participants need to know before Arduino training?+

Curiosity, computer with USB port, no prerequisites in programming or electronics.

Is a certificate issued after Arduino training?+

Yes. A Learni completion certificate is issued, along with the individual evaluation report. Learni is a certified training provider and prepares for third-party certifications, but does not award them itself.

Your professional training, anywhere